PVC-Flat-C screened, EMC-preferred type,falt cable

Cu/Rubber/Cu/Neoprene 1.ISO9001,ISO14001,CCC 2.China Biggest cable manufactory 3.7000 staffs 4.Standard:GB JB IEC BS VDE JIS

Application

Neoprene screened flat cables are used mainly as trailing cable for crane installations, floor conveyer systems and shelf control units. Thesecables are also available for export with UL-approval.Installation notesCables reels with flat cables must be transported in standing position on the flange. A bending flexibility can be achieved on a plane surface.For this purpose, the corresponding fitting instructions should be followed.1.Put the cable trolly on the guiding rail or upon carrier beam and push them together at the starting point. The distance between thebedding surface of two cable trollys must be wider than the double thickness of a cable-packet.2.During the packeting performance, it must be started with the smaller cross-section which lays on the bedding surface and will be buildedsuccessively so that the biggest cross-section is laying on the top.3.Further, be careful of a symmetrical load distribution.4.In case of multicore flat cables with small cross-section, smaller than 2,5 mm², is very critical due to its low tensile stress. In such case, you should add 10% reserve wire for calculation.EMC = Electromagnetic compatibillityTo optimise the EMC features we recommend a large round contact of the copper braiding on both ends

Construction

Conductor:Bare copper, extra fine wire conductors according to DIN VDE 0295 Kl. 6 and IEC 60228 cl. 6, BS 6360 cl. 6

Core insulation:Special rubber core insulation

Core identification:Core identification up to 5 cores, colour code to DIN VDE 0293 7 cores and above with number printing, Cores laying parallel

Screened:Copper screened braiding, approx. 85% coverage

Outer sheath:Special Neoprene

Marking:Manufacture name (trademark) and type, Production year/week or batch number ,Metre-marked.

Parameters

AWG	Cross-section mm²	Cu content kg/km	Outer diameter approx. mm	Weight approx. kg/km
16	8G 1.5	231.0	7.9x42.0	520.0
16	12G 1.5	346.0	7.9x61.0	790.0
14	4G 2.5	164.0	8.5x25.5	420.0
14	6G 2.5	247.0	8.5x34.5	540.0
14	12G 2.5	494.0	8.9x68.0	1000.0
14	4G 2.5	1116.0	16.0x51.0	1650.0

G = with green-yellow earth core;x = without green-yellow earth core.

Technical data

1.Rated voltage:U0/U 300/500V

2.Test voltage:3000 V

3.Bending radius:15 x cable diameter

4.Temperature range:flexing -25°C to +60°C;fixed installation -40°C to +80°C

5.cold-resistant,Extensively oil resistant, Chemical Resistance ,High flexibility Packeting possibility:Test according to VDE 0482-332-1-2, DIN EN 60332-1-2/ IEC 60332-1 (equivalent DIN VDE 0472 part 804 test method B)

6.Radiation resistance:up to 50x106 cJ/kg (up to 50 Mrad)

PVC-Flat-C screened, EMC-preferred type,falt cable